[2024] How to Fix iPad Stuck in Reboot Loop in 4 Solutions?
Category: iPhone Issues
3 mins read
When you turn on your iPad, instead of functioning normally, the iPad stuck in reboot loop, preventing you from using any features.
To get your iPad back to work and stop it from showing Apple logo on and off, keed reading to find out the 4 solutions.
In this article:
- Part 1: 4 Solutions to Fix iPad Stuck in Reboot Loop
- 1.1. Fix iPad Boot Loop for iPadOS System Issues (No Data Loss)
- 1.2. Force Restart iPad
- 1.3. Use iTunes to Restore iPad (Data Loss)
- 1.4. Enter DFU Mode to Repair iPad (Data Loss)
- Part 2: Why Does My iPad Stuck on Apple Logo Loop?
- Bonus: How to Fix When iPad Boot Loop for Low Battery or Charging?
Part 1: 4 Solutions to Fix iPad Stuck in Reboot Loop
To fix iPad stuck in boot loop, below are 4 methods. Before heading to each solution, you can have a quick look at the comparison table below.
Method | Fix iPad Restart Loop Without Losing Data | Success Rate | Consumed Time |
---|---|---|---|
iPadOS System Repair Tool | ![]() |
99.99% | 10-15 minutes |
Force Restart | ![]() |
40% | 15-20 minutes |
iTunes Repair | ![]() |
50% | 1-1.5 hours |
DFU Mode | ![]() |
60% | 1.5-2 hours |
1 Fix iPad Stuck in boot Loop with iPadOS System Repair Tool
The right tool to fix iPad stuck on Apple logo loop is iMyFone Fixppo, which can get iPad out of boot loop without erasing any of your iPad data in 10 minutes.
When faced with a critical situation that requires you to get into the iPad, Fixppo will give you immediate access to your iPad in 3 simple clicks, easily fix when iPad won't turn off.
![iMyFone Fixppo](https://images.imyfone.com/en/assets/article/common/fixppo-img.webp)
iPad Reboot Loop Fix Tool:
- Easily fix iPad stuck in boot loop issue without losing iPad data.
- Help to solve all kinds of iPad problems including iPad stuck in white screen, iPad black screen, iPad screen shows battery with red line, etc.
- The 99.99% success rate promises to get your iPad back to function, enabling you to turn on the iPad again.
- Support to 1 click enter/exit recovery mode on iPad fo free.
- Compatible with all iPad models and iPadOS versions including the latest iPadOS 17/18 beta.
Stop worrying about this iPad restart loop problem, download Fixppo now for it to help to get your iPad out of boot loop trouble and turn on the iPad.
Step 1: Download and install the program to your PC, then launch and connect it to the computer with the USB cable.
Step 2: From the interface, choose the Standard Mode, which can fix iPad keeps restarting Apple logo issue without losing data.
Step 3: The available firmware version will be provided when your iPad model is detected. You can click the Download button to get it, which won't take long.
Step 4: When the firmware is downloaded, you can click the Start Standard Repair button, Fixppo will begin to repair your iPadOS system.
In a few minutes, your iPad will stop looping the Apple logo and restart itself. Whatever the reasons that cause your iPad boot loop randomly, you can rest assure now and use your iPad again with Fixppo!
2 Force Restart iPad to Fix iPad Stuck on Apple Logo Loop
Force restart is regarded as one of the easiest ways to fix common iOS/iPadOS problems including this iPad stuck in reboot loop issue. You can try this force restart method when you want to exit iPhone/iPad Apple logo loop.
As the force-restarting method varies from device to device, you can follow different steps here:
▼To force restart iPad with Home button:
- Hold down the Sleep/Wake + Home buttons down for about 25-30 seconds.
- When the iPad screen shows the Apple logo, release the buttons for it to restart normally.
▼To force restart iPad without Home button but Face ID:
- Press and release the Volume Up, then and Volume Down button, then press and hold the Power button until you see the Apple logo.
- When the iPad not turning on, try the step again.
3 Use iTunes to Restore iPad in Boot Loop (Data Loss)
iTunes can be another helper if your iPad stuck in restart loop. By restoring iPad with iTunes, you can use your device again.
However, please notice that this method will wipe off all your iPad data and restore it to factory settings. If you're aware of this drawback, please proceed.
Step 1: Please connect your iPad to the PC, launch iTunes and begin to put iPad in recovery mode:
- For iPad with Home button: Press the Power button along with the Home button and keep holding them. Don't release them until you see the Connect to iTunes sign appears on the screen, which will show up after the Apple logo.
- For iPad with Face ID: Press the Volume Up button, then the Volume Down button, then the Power button. Again, remove your finger only when you see the Connect to iTunes button.
Step 2: Now, you'll get a pop-up that says your iPad is detected in recovery mode. Click on the Restore button to confirm the action. When it is restored, please check if the issue that iPad keeps restarting with apple logo is fixed.
If your iPad stuck in recovery mode, you can try Fixppo to exit recovery mode on iPad in 1 click for totally free!
4 Enter DFU Mode to Repair iPad in Reboot Loop (Data Loss)
To solve iPad turning on and off loop problem, another method is by putting it into DFU mode. As an advanced method, DFU mode goes deeper into your iPad system and can fix more serious problems compared to the recovery mode.
As it requires to use iTunes as well, you should make a backup first if you're sure to employ this method.
Step 1: Please connect your iPad to the PC, launch iTunes and start to put your iPad into DFU mode:
- For iPad with Home button: Press the Power button and the Home button simultaneously for about 10 seconds. After that, release the Power button but continue to hold down the Home button for at least 5 seconds.
- For iPad with Face ID: Press the Volume Up > Volume Down > Power button until the screen goes black. As soon as the screen turns black, press the Volume Down button with the Power button for 5 seconds. 5 seconds later, release the Power button but keep holding the Volume Down for at least 5 seconds.
Step 2: If your iPad screen is still in black screen, it means it has entered the DFU mode. Now, click the OK then the Restore button to restore your iPad with iTunes. For iPhone/iPad won't go into DFU mode, please follow steps mentioned once more.
Go check if your iPad reboot loop problem is fixed. If not, you can repeat the steps or use Fixppo directly.
Both recovery mode and DFU mode can fix iPad boot loop issue, but at the cost of erasing iPad data.
To retain all your important content, it's recommended to try Fixppo, which can protect all iPad data while getting it out of reboot loop.
Part 2: Why Does My iPad Stuck on Apple Logo Loop?
For iPad flashes Apple logo then black screen, there are some reasons you need to know to make some preventions:
- iPad overheating or is in insufficient battery charge.
- A temporary issue or glitch in the iPadOS operating system.
- Problems with a specific app downloaded on your iPad.
- Virus attack when trying to make an upgrade or downgrade improperly.
- There are hardware issues with your iPad like the board.
"If this iPad reboot loop issue is caused not by the hardware, I'm sure, probably the software issue, can I fix this problem without losing data? I want to keep my important data."
YES. You can restore iPad from boot loop problem by using iPad system repair tool introduced there, with 100% secure and 99.99% success rate.
Bonus: How to Fix When iPad Boot Loop for Low Battery or Charging?
If your iPad keeps restarting Apple logo when it is charging or when it has a low battery, here is a solution that is worth trying, which has been proven to be helpful for some people.
- Plug your USB charging cable into the power outlet. It will restart and you will see the Apple logo.
- As soon as the Apple logo appears, unplug the charger. Then the home screen will appear. You need to quickly plug in the charger again because the home screen only appears in a flash.
- Then the iPad will shut down and will not reboot again. Let the iPad charge for at least 30 minutes before you use it again.
Conclusion
That's all solutions for your iPad stuck in reboot loop. Also, you can learn why your iPad flashing Apple logo then turnded off, so you can take some preventions.
And if you don't want to fix this iPad problem manually and want to retain all your data, just try this iPadOS system repair software! It can save you time and energy greatly!